Sntp Client Commands - Multitech MultiConnect MTS2SA-T User Manual

SNTP Client Commands

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set sntp client <enable/disable>
Starts the SNTP Client to contact the configured server on UDP port 123
and set the local time.
Disable
OK
1. Too few arguments
"Usage: set sntp-client <enable/disable>
Type set sntp-client ? for more information"
set sntp-client ntp-server-name <ip-address>
Sets the NTP server IP address to which the SNTP Client has to contact to
update the time.
0.0.0.0
OK
1. Invalid arguments
"error: Invalid IP address"
Type set sntp-client ? for more information"
2. Too few arguments
"Usage: set sntp-client ntp-server-name <ip-address>
Type set sntp-client ntp-server-name ? for more information"
set sntp-client time-zone <string (0-3)>
Sets the time zone.
UTC
OK
1. Invalid arguments
"error: Invalid Time Zone"
2. Too few arguments
"Usage: set sntp-client time-zone <string (0-3)>
Type set sntp-client time-zone ? for more information"
set sntp-client time-zone-offset <+/-hh:mm>
where
hh = 00 to 23
mm = 00 to 59
Sets the offset time from UTC.
+00:00
OK
1. Invalid arguments
"error: Invalid Offset"
2. Too few arguments
"Usage: set sntp-client time-zone-offset <+/-hh:mm>
Type set sntp-client time-zone-offset ? for more information"
Chapter 4 – Command Line Interface (CLI)
SNTP Client Commands – Setup
57