Multitech MultiConnect MTS2SA-T User Manual page 32

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set serial [s0] auto-dialout-port <port_num>
If auto-dialout is enabled, specifies the auto dialout-port on which the client
can connect.
Default is 5000.
Note: The port number should be other than standard TCP ports.
This command is valid only for device port S0.
5000
OK
1. Too few arguments
"Usage: set serial s0 auto-dialout-port <port_num>
Type 'set serial s0 auto-dialout-port ? for more information"
2. Multiple matches
auto-dialin
auto-dialin-ipaddress
auto-dialin-port
3. Invalid Port Number
"error: Invalid port number
Type 'set serial s0 auto-dialout-port ? for more information"
4. If "set serial s1 auto-dialout-port 5000" is given
"error: Command not supported on modem port s1"
set serial [s0] auto-dialout-protocol <telnet/>
Note:
This syntax gives a provision for future extensibility. <SSH Server, etc>.
This command is valid only for device port S0.
Telnet
OK
1. Too few arguments
"Usage: set serial s0 auto-dialout-protocol <telnet/>
Type 'set serial s0 auto-dialout-protocol ?' for more information"
2. Multiple matches
auto-dialin
auto-dialin-ipaddress
auto-dialin-port
3. Invalid string
error: Invalid parameter
Type 'set serial s0 auto-dialout-protocol ?' for more information"
4. If "set serial s1 auto-dialout-protocol telnet" is given
"error: Command not supported on modem port s1"
set serial [s0/s1] baud-rate <baud>
Sets the serial baud rate.
115200
OK
1. Too few arguments
"Usage: set serial s0/s1 baud-rate <baud>
Type 'set serial s0/s1 baud-rate ?' for more information"
2. Invalid baud-rate
"error: baud-rate range : [300,......]
Type 'set serial s0/s1 baud-rate ?' for more information"
Chapter 4 – Command Line Interface (CLI)
Serial Commands – Setup
auto-dialin-protocol
auto-dialout
auto-dialout-port
auto-dialin-protocol
auto-dialout
auto-dialout-port
auto-dialout-protocol
auto-dialout-protocol
32