Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set ip telnet auto-dialout <enable/disable>
Enables Telnet connectivity between the MultiConnect IP and the remote
device.
This flag enables/disables the Telnet Auto dialout globally.
Enabled
OK
1. Too few arguments
"Usage: set ip telnet auto-dialout <enable/disable>
Type 'set ip telnet auto-dialout ?' for more information"
2. Invalid String
Type 'set ip telnet auto-dialout ?' for more information"
set ip telnet escape-string <string>
The Telnet Server scans for this escape sequence and transfers the control
to the command parser.
By default, the Telnet Server scans for "+++inet".
+++ inet
OK
1. Too few arguments
"Usage: set ip telnet escape-string <string>
Type 'set ip telnet escape-string ?' for more information"
2. Multiple matches
escape-monitor
escape-string
set ip telnet escape-monitor <enable/disable>
Enables/disables the ''monitor'' flag that scans for the escape sequence.
Enabled
OK
1. Too few arguments
"Usage: set ip telnet escape-monitor <enable/disable>
Type 'set ip telnet escape-monitor ?' for more information"
2. Multiple matches
escape-monitor
escape-string
3. Invalid String
Type 'set ip telnet escape-monitor ?' for more information"
set ip telnet inactivity <enable/disable>
Enables/disables the inactivity functionality.
Disable
OK
1. Too few arguments
"Usage: set ip telnet inactivity <enable/disable>
Type 'set ip telnet inactivity ?' for more information"
2. Multiple matches
inactivity
inactivity-timeout
3. Invalid String
Type 'set ip telnet inactivity ?' for more information"
Chapter 4 – Command Line Interface (CLI)
IP Commands – Setup
25