Multitech MultiConnect MTS2SA-T User Manual page 50

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
orte d : [ 1 to ]e
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set send-mail to-address <n> <email-address>
Sets the email-address as one of the primary addressee. This is the default
email address to which email messages are sent.
NULL
OK
1. Too few arguments
"Usage: set send-mail to-address <n> <email-address>
Type 'set send-mail to-address <n> ?' for more information"
2. Invalid to-address number
"ERROR: to-address numbers supported: [1 to 5]
Type 'set send-mail to-address <n> ?' for more information"
set send-mail cc-address <n> <email-address>
Sets the email-address as the alternate addressee (carbon copy). This is
the default email address that the primary addressee's email messages are
copied.
NULL
Chapter 4 – Command Line Interface (CLI)
SMTP Client Commands – Setup
where n = 1 to 5.
where n = 1 to 5.
50