Chapter 14 - Pop3 Client; Introduction; Setup And Configuration Prerequisites - Multitech MultiConnect MTS2SA-T User Manual

Serial-to-serial adapter with ip
Hide thumbs Also See for MultiConnect MTS2SA-T:
Table of Contents

Advertisement

Chapter 14 – POP3 Client

Introduction

The MultiConnect IP can be configured as a POP3 client to retrieve emails from a POP3 server. The
POP3 client, available in MultiConnect IP, can do the following:
List the number of messages and message sizes
Retrieve the header information of messages
Retrieve the complete email
Retrieve the top 'n' lines of a message
Delete an email on the server
Retrieve the unique email ID listing
Important Notes:
This application is applicable only in the non-transparent mode.
This application can be used only after the PPP link is UP with an IP Address on the modem
port. (Refer to Chapter 6 Prerequisite Configurations - Physical Link Established Over the Modem
Port for more details)
In the event of PPP link DOWN, the POP3 request triggers PPP link establishment.

Setup and Configuration Prerequisites

To fulfill the prerequisites for receiving/retrieving emails from the email server, configure the following
parameters:
pop3 server name/ip address
Command: set recv-mail server-name <server-name>
pop3 port number
Command: set recv-mail server-port <port-number>
pop3 account/user name
Command: set recv-mail mailbox-name <account/user name>
pop3 account/user password
Command: set recv-mail mailbox-password <account/user password>
These commands need to be executed only to set the initial configuration. However, they must be
executed whenever a parameter is changed.
Example
Assuming that the POP3 server is 192.168.2.10, POP3 port is 110, account/user name is mtss, and the
account/user password is mtsspass, execute the following commands to configure the MultiConnect IP
to retrieve emails.
set recv-mail server-name 192.168.2.10
OK
set recv-mail server-port 110
OK
set recv-mail mailbox-name mtss
OK
set recv-mail mailbox-password mtsspass
OK
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
Chapter 14 – POP3 Client
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multiconnect mts2sa-t-r

Table of Contents