Ip Setup Commands - Multitech MultiConnect MTS2SA-T User Manual

IP Setup Commands

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set ip dns <enable/disable>
Enables/disables the DNS client.
Enabled
OK
1. Too few arguments
"Usage: set ip dns <enable/disable>
Type 'set ip dns ?' for more information"
2. Invalid string
Type 'set ip dns ?' for more information"
set ip hostname <hostname>
Sets the host name of the MultiConnect IP.
"MultiConnectIP"
OK
1. Too few arguments
"Usage: set ip hostname <hostname>
Type 'set ip hostname ?' for more information"
set ip pri-dns <ip addr>
Sets the primary DNS IP address to 0.0.0.0.
0.0.0.0
OK
1. Too few arguments
"Usage: set ip pri-dns <ip addr>
Type 'set ip pri-dns ?' for more information"
2. Invalid IP Address
"error: Invalid IP address
Type 'set ip pri-dns ?' for more information"
set ip sec-dns <ip addr>
Sets the secondary DNS IP address to 0.0.0.0.
0.0.0.0
OK
1. Too few arguments
"Usage: set ip sec-dns <ip addr>
Type 'set ip sec-dns ?' for more information"
2. Invalid IP Address
"error: Invalid IP address
Type 'set ip sec-dns ?' for more information"
set ip syslogd <enable/disable>
Enables/Disables syslogd.
Disable
OK
1. Too few arguments
"Usage: set ip syslogd <enable/disable>
Type 'set ip syslogd ?' for more information"
Chapter 4 – Command Line Interface (CLI)
IP Commands – Setup
23