Smtp Client Commands - Multitech MultiConnect MTS2SA-T User Manual

SMTP Client Commands

The commands in this section are listed in the order in which they might be used.
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set send-mail smtp-server-name <name/ip-address>
Sets the SMTP server name or IP address. Server names must be such
that they can be resolved by the DNS.
NULL
OK
1. Too few arguments
"Usage: set send-mail smtp-server-name <name/ip-address>
Type 'set send-mail smtp-server-name ?' for more information"
2. Invalid name/IP address
"ERROR: Invalid SMTP Server Name/IP Address"
set send-mail smtp-server-port <port>
Sets the SMTP Server port.
25
OK
1. Too few arguments
"Usage: set send-mail smtp-server-port <port>
Type 'set send-mail smtp-server-port ?' for more information"
set send-mail host-name <host name>
Sets the SMTP Client host name.
NULL
OK
1. Too few arguments
"Usage: set send-mail host-name <host name>
Type 'set send-mail host-name ?' for more information"
set send-mail from-address-identity <name>
Sets the 'From:' description in the email header as <name>.
NULL
OK
1. Too few arguments
"Usage: set send-mail from-address-identity <name>
Type 'set send-mail from-address-identity ?' for more information"
set send-mail from-address <email-address>
Sets the email-address as the Default From address information.
NULL
OK
1. Too few arguments
"Usage: set send-mail from-address <email-address>
Type 'set send-mail from-address ?' for more information"
Chapter 4 – Command Line Interface (CLI)
SMTP Client Commands – Setup
49