Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set serial [s0/s1] modem init-string <init-num> <init-str>
Configures the modem initial strings.
Init-num can range from 1-5.
Triggers for a reboot upon save.
Example:
Set serial s0 modem init-string 1 ATZ
Set serial s0 modem init-string 1 "ATZ AT&F"
Important Note:
Use double quotes if more than one word is used in the <init-str>. Refer to
example 2 above. This holds true for all the following commands that need
a string as a parameter.
Init-string 1 is set to 'ATZ'
Init-string 2 is set to ' '
Init-string 3 is set to ' '
Init-string 4 is set to ' '
Init-string 5 is set to ' '
OK
1. Too few arguments
"Usage: set serial s0/s1 modem init-string <init-num> <init-str>
Type 'set serial s0/s1 modem init-string ?' for more information"
Invalid init-num
"ERROR: init-num range supported : [1-5]"
set serial [s0/s1] modem ok-string <ok-str>
Sets the modem OK string.
Triggers for a reboot upon save.
OK
OK
1. Too few arguments
"Usage: set serial s0/s1 modem ok-string <ok-str>
Type 'set serial s0/s1 modem ok-string ?' for more information"
set serial [s0/s1] modem ring-string <ring-str>
Sets the modem ring string. Triggers for a reboot upon save.
RING
OK
1. Too few arguments
"Usage: set serial s0/s1 modem ring-string <ring-str>
Type 'set serial s0/s1 modem ring-string ?' for more information"
set serial [s0/s1] parity <even/odd/none>
Sets parity to even/odd/none.
None
OK
1. Too few arguments
"Usage: set serial s0/s1 parity <even/odd/none>
Type 'set serial s0/s1 parity ?' for more information"
2. Invalid parity setting
"error: parity supported: [even/odd/none]
Type 'set serial s0/s1 parity ?' for more information"
Chapter 4 – Command Line Interface (CLI)
Serial Commands – Setup
38
Need help?
Do you have a question about the MultiConnect MTS2SA-T and is the answer not in the manual?
Questions and answers