MultiConnect™ SS Serial-to-Serial Device Server User Guide...
Page 2
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revisions...
Replacement Parts...17 Appendix C – WEEE Directive (Waste Electrical and Electronic Equipment)...18 Introduction ...18 Instructions for Disposal of WEEE by Users in the European Union...18 Index...19 Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Table of Contents Table of Contents...
Industrial and medical remote monitoring systems • Point-of-sale terminals • Remote diagnostics • Remote metering • Security systems • Ticketing machines • Vending/gaming machines • And more….. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 1 – Product Description and Specifications...
Description MTS2SA-T Serial-to-Serial + IP (External Power) MTS2SA-T-R Serial-to-Serial + IP (RS-232 Power) Note: The MTS2SA-T-R (RS-232 Powered) requires power to be supplied into Pin 6 of the female DB9. Package Contents • One MultiConnect Device Server • One universal power supply with power cord included with the externally powered device server •...
Description Activity – Lit when data is being transmitted or received. Status – Blinks to indicate that the unit is functioning. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 1 – Product Description and Specifications DHCP Client: Request IP address for Ethernet Interfaces...
To attach the brackets to the MultiConnect, slide the mounting brackets into the corresponding slots on the back of the MultiConnect chassis. Attach the device server to the surface with two screws. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 2 – Installation...
Powered in one of two ways: Powered by External Power Supply Powered through RS-232 Cable (Pin 6) MTS2SA-T MTS2SA-T-R RS-232 Connector RS-232 Connector RS-232 & External Power Connectors RS-232 Power Pin Connector Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C)
Page 10
Pin 3 TX Pin 4 DTR Pin 5 GND Pin 6 DSR Pin 7 RTS Pin 8 CTS Pin 9 RI Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Multi-Tech MultiConnect Female Connector Typical 190mA Maximum 245mA Typical 100mA...
To leave Command Mode, exit your terminal or Telnet session or type the word Exit at the command prompt. Note: See the Restore command and IP Escape String command. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 3 – Managing and Configuring the MultiConnect...
MultiConnect device server. For your convenience, we have also provided a reference guide of modem AT commands. These guides are available on the MultiConnect CD and on the Multi-Tech Web site. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C)
Error 1. Too few arguments Possible value(s) are Country or Region Codes – Tech currently supports is available on the Multi-Tech Web site at: http://www.multitech.com/PRODUCTS/Categories/External_Device_Networking/global_modems/configuration.asp #chart Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 5 – Setting Country or Region Codes Using the CLI There is no validation on the country/region code value.
Perform a file upload. The MultiConnect reboots and will be up after a few seconds (10-15 secs). The MultiConnect reboots after it has been successfully upgraded. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Chapter 6 – Flash Upgrade...
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits. Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Information Appendix A – Regulatory Information...
Multi-Tech Warranty Statement Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of purchase is not provided, two, five, or ten years (depending on model) from date of shipment.
Replacement Parts SupplyNet, Inc., can supply you with replacement power supplies, cables and connectors for selected Multi-Tech products. You can place an order with SupplyNet via mail, phone, fax or the Internet at the following addresses: Mail: SupplyNet, Inc.
Hazardous Substances) complements the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase. The WEEE Directive covers all Multi-Tech products imported into the EU as of August 13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recovery from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements.
Internet Applications...7 IP Serial Setup Commands set serial modem country code value...13 show serial modem country code...13 Multi-Tech Systems, Inc. Serial-to-Serial Device Server User Guide (S000354C) Index Login using Telnet... 11 Ordering Replacement Parts ... 17 Pin Functions ... 10 Reduced Development Time ...
Need help?
Do you have a question about the MTS2SA and is the answer not in the manual?
Questions and answers