Multitech MultiConnect MTS2SA-T User Manual page 58

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set sntp-client polling-time <value>
where
value = 2 to 1440
Sets the polling time at which SNTP client requests the server to update the
time.
300
OK
1. Invalid arguments
"error: Invalid Polling time"
2. Too few arguments
"Usage: set sntp-client polling-time <value>
Type set sntp-client polling-time ? for more information"
set sntp-client daylight-saving <enable/disable>
Enables/Disables the Day Light Saving Mode.
Enable
OK
1. Invalid arguments
"error: Invalid parameter"
2. Too few arguments
"Usage: set sntp-client daylight-saving <enable/disable>
Type set sntp-client daylight-saving ? for more information"
set sntp-client daylight-saving offset <+/-value>
where
value = 0 to 120 minutes
Sets the offset to use during the Day Light Saving Mode.
60
OK
1. Invalid arguments
"error: Invalid offset value"
2. Too few arguments
"Usage: set sntp-client daylight-saving offset <value>
Type set sntp-client daylight-saving offset ? for more information"
set sntp-client daylight-saving start-ordinal <string>
where
string = first/second/third/forth/last
Sets the start ordinal to use during the Day Light Saving Mode.
First
OK
1. Invalid arguments
"error: Invalid start ordinal"
2. Too few arguments
"Usage: set sntp-client daylight-saving start-ordinal <string>
Type set sntp-client daylight-saving start-ordinal ? for more information"
Chapter 4 – Command Line Interface (CLI)
SNTP Client Commands – Setup
58