Multitech MultiConnect MTS2SA-T User Manual page 33

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set serial [s0/s1] buffer-datasize <0/d bytes>
This command primarily buffers the data.
0 – No buffering.
OK
1. Too few arguments
"Usage: set serial s0/s1 buffer-datasize <0/d bytes>
Type 'set serial s0/s1 buffer-datasize ?' for more information"
2. Multiple matches
buffer-datasize
buffer-time
3. Datasize range
"error: Buffer data-size range : [1 - 1500] bytes
Type 'set serial s0/s1 buffer-datasize ?' for more information"
set serial [s0/s1] buffer-time <0/t secs>
This command is related to the 'set serial s0/s1 buffer-datasize' command.
The buffering of data shall either wait for datasize configured (in the previous
command) or time t secs.
Example:
Sl
Buffer-datasize
Buffer-time (secs)
Descriptions
1
0 - Default
0 - Default
No buffering. Passes the data to the serial application on the reception of a
character on the serial application.
2
10
0
Buffer till it reaches buffer-datasize (10); then passes it to the serial application.
3
0
10
No buffering. Pass the data to the serial application on the reception of a
character on the serial.
4
10
10
Buffer the characters till it reaches the buffer-datasize (10)
(OR)
wait for the buffer-time (10Secs).
The data is passed on to the serial application depending on which condition is
satisfied first.
0 – No buffering
OK
1. Too few arguments
"Usage: set serial s0/s1 buffer-time <0/t secs>
Type 'set serial s0/s1 buffer-time ?' for more information"
2. Multiple matches
buffer-datasize
buffer-time
3. Time limit
"error: Time limit supported : <1 – 60 secs>
Type 'set serial s0/s1 buffer-time ?' for more information"
Chapter 4 – Command Line Interface (CLI)
Serial Commands – Setup
33