Multitech MultiConnect MTS2SA-T User Manual page 60

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set sntp-client daylight-saving end-weekday <dayofweek>
where
dayofweek = Sunday, Monday ... Saturday
Sets the end weekday to use during the Day Light Saving Mode.
Sunday
OK
2. Invalid arguments
„error: Invalid end day of the week"
2. Too few arguments
"Usage: set sntp-client daylight-saving end-weekday <dayofweek>
Type set sntp-client daylight-saving end-weekday ? for more
information"
set sntp-client daylight-saving end-month <month>
where
month = january, ...december
Sets the end month to use during the Day Light Saving Mode.
October
OK
2. Invalid arguments
„error: Invalid end month"
2. Too few arguments
"Usage: set sntp-client daylight-saving end-month <month>
Type set sntp-client daylight-saving end-month ? for more information"
set sntp-client daylight-saving end-time <hh:mm>
where
hh = 00 to 23
mm = 00 to 59
Sets the end time to use during the Day Light Saving Mode.
02:00
OK
2. Invalid arguments
„error: Invalid end time"
2. Too few arguments
"Usage: set sntp-client daylight-saving end-time <hh:mm>
Type set sntp-client daylight-saving end-time ? for more information"
show sntp configuration
Displays the SNTP configuration
NA
OK
1. Too few arguments
Possible value(s) are configuration
Chapter 4 – Command Line Interface (CLI)
SNTP Client Commands – Setup
SNTP Client Commands – Show
60