Multitech MultiConnect MTS2SA-T User Manual page 48

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
save param
Invoking this command will save the host parameters into the flash. The
"/var/apps" directory is gun zipped to apps.tar.gz and written into flash.
(APPS _SECTOR)
-
OK
1. Too few arguments
"ERROR: Too few arguments
Type 'save ?' for more information"
show http configuration
Displays the HTTP related configurations.
-
OK
1. Too few arguments
"ERROR: Too few arguments
Type 'show http configuration ?' for more information"
show device-parameter P<n>
where n = 0 to 99.
Displays the value of the requested parameter from MultiConnect IP.
-
OK
1. Too few arguments
"ERROR: Too few arguments
Type 'show device-parameter ?' for more information"
show device-parameter modified
Displays the status of the host parameters; for example, whether they are
changed by the browser.
Returns "Device parameters changed" when values are changed by the
remote browser.
Returns "Device parameters not changed" when values are not changed.
-
OK
1. Too few arguments
"ERROR: Too few arguments
Type 'show device-parameter ?' for more information"
Chapter 4 – Command Line Interface (CLI)
HTTP Server Commands – Setup
HTTP Server Commands – Show
48