Fastconnect Commands - Multitech MultiConnect MTS2SA-T User Manual

FastConnect Commands

Command: $F
Description:
Defined Values:
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
Chapter 10 − Modem Mode AT Commands, S-Registers, and Result Codes
FastConnect Control
Allows configuring of the client modem to connect to a central site modem that
supports non-standard V.22 and V.22 bis FastConnect protocols.
Specifies the initial requested mode of operation when the modem is operating as
the originator. The options are:
$F0 Normal connection (Default)
$F1 FastConnect without answer tone
$F2 Reserved
$F3 FastConnect with answer tone
114