Multitech MultiConnect MTS2SA-T User Manual page 53

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set recv-mail leave-on-server <enable/disable>
Set the variable "leave a copy of message on server" flag, which tells the
POP3 server not to delete the emails from it once the emails are received.
Disable
OK
1. Too few arguments
recv-mail list [index]
This command retrieves list of emails from the mailbox.
Displays the list of emails in the order below:
<index of the mail> <size in bytes>
or
Mailbox is empty
-
OK
1. Too few arguments
Usage: recv-mail list [index]
Type 'recv-mail ?' for more information
recv-mail header [index]
This command receives the header information of all the emails present in
the mailbox if index is not issued. If index is issued, the mail header
corresponding to the index is retrieved.
-
OK
1. Too few arguments
Usage: recv-mail header [index]
Type 'recv-mail ?' for more information
recv-mail mail [index]
This command retrieves all the pending emails present in the mailbox if
index is not given. If index is issued, the email corresponding to the index is
retrieved.
-
OK
1. Too few arguments
Usage: recv-mail mail [index]
Type 'recv-mail ?' for more information
recv-mail delete <index>
Deletes the email corresponding to the index. The emails will not be deleted
until the "recv-mail quit" command is executed.
-
OK
1. Too few arguments
Usage: recv-mail delete <index>
Type 'recv-mail ?' for more information
Chapter 4 – Command Line Interface (CLI)
POP3 Client Commands – Setup
53