Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Multitech MultiConnect MTS2BTA
Summary of Contents for Multitech MultiConnect MTS2BTA
- Page 1 MultiConnect Adapter Serial-to-Bluetooth Adapter MTS2BTA MTS2BTA-R User Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revision...
-
Page 3: Table Of Contents
Setting Parameters...12 Test Procedures Using AT Commands ...13 Disabling Flow Control Using AT Commands...14 Configuring to Use DTR for Resetting the MTS2BTA Using AT Commands ...14 Chapter 4 – Peripheral Devices...15 Antenna Requirements ...15 Pin Assignments for the Serial Port ...15 Appendix A –... -
Page 4: Chapter 1 - Description And Specifications
10 alphanumeric Personal Identification Number (PIN) authentication. It utilizes FHSS (Frequency Hopping Spread Spectrum) technology. In addition, SocketWireless Bluetooth uses error correction schemes for guaranteed packet delivery. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 1 – Description and Specifications... -
Page 5: Product Build Options
Although input protection circuitry has been incorporated into the devices to minimize the effect of this static buildup, proper precautions should be taken to avoid exposure to electrostatic discharge during handing and operation. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 1 – Description and Specifications... -
Page 6: General Safety
The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech’s accessory specifications may invalidate the warranty of the MultiConnect Adapter. • In the unlikely event of a fault in the adapter, contact Multi-Tech Technical Support. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 1 – Description and Specifications... -
Page 7: Technical Specifications
ATDM idle mode = 60 seconds ATDM Master Mode = indefinitely (need to perform ATUCL to cancel last Timeout for loss of Bluetooth connection = 4 seconds Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 1 – Description and Specifications 50-byte RX buffer 2mA (0.0066W @ 3.3Vdc) (0.01W @ 5Vdc) -
Page 8: Led Indicators
COM port. When it goes off, a connected adapter will disconnect. Power. This LED Indicates the presence of DC power when lit. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 1 – Description and Specifications... -
Page 9: Chapter 2 - Installation And Cabling
The mounting holes must be separated by 4 -7/16 inches center-to-center. Slide the mounting bracket into the slot on the back of the chassis. Attach the adapter to the surface with two screws. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 3 – AT Commands, S-Registers, and Result Codes... -
Page 10: Step 2 - Connect The Adapter To Your System
Plug the fused cable into the power connector on the MultiConnect. Then attach the two wires at the other end of the fused cable to a DC power source. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 3 – AT Commands, S-Registers, and Result Codes... -
Page 11: Chapter 3 - At Commands
If you change communications parameter settings, remember to change your terminal or emulator communications settings to correspond to the newly created parameter settings. • AT commands will not echo back to the terminal. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 3 – AT Commands, S-Registers, and Result Codes... -
Page 12: Setting Parameters
Note about Being Connected in Fast Data Mode If connected in Fast Data Mode, it is necessary to reset the device to break the connection. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 3 – AT Commands, S-Registers, and Result Codes... -
Page 13: Test Procedures Using At Commands
Do this for both master and slave Bluetooth adapters. Use terminal emulator like Hyperterminal or ZOC to communicate to Bluetooth socket modem using AT command set. Set baud rate to 9600bps. If MTS2BTA has label with different baud rate then set emulator to match with this baud rate. -
Page 14: Disabling Flow Control Using At Commands
Now can communicate with Bluetooth device and when serial connection is terminated (DTR goes off) the Bluetooth adapter will reset. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Chapter 3 – AT Commands, S-Registers, and Result Codes // Set PIO3 as output and do not store in flash... -
Page 15: Chapter 4 - Peripheral Devices
Receive Data Transmit Data Data Terminal Ready Signal Ground Data Set Ready Request to Send Clear to Send Ring Indicator Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 2.4-2.5 Ghz 50 ohm nominal <2.0:1 2 dBi Omni Vertical Half Wave Dipole... -
Page 16: Appendix A - Regulatory Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel brouilleur. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Appendix A – Regulatory Compliance antenna. -
Page 17: New Zealand Telecom Warning Notice
The above country-specific examples do not cover all countries with specific regulations; they are included to show you how each country may differ. If you have trouble determining your own country's requirements, check with Multi-Tech's Technical Support for assistance. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Appendix A – Regulatory Compliance device. -
Page 18: Appendix B - Multi-Tech Warranty Statement And Product Repair
Statement and Product Repair Warranty Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of purchase is not provided, two, five, or ten years (depending on model) from date of shipment. -
Page 19: Repair Procedures For International Customers (Outside U.s.a. And Canada)
You can place an order with SupplyNet via mail, phone, fax, or the Internet at the following addresses: Mail: SupplyNet, Inc. 614 Corporate Way Valley Cottage, NY 10989 Phone: 800 826-0279 Fax: 914 267-2420 Email: info@thesupplynet.com Internet: http://www.thesupplynet.com Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Appendix C – Warranty and Service... -
Page 20: Index
Installation ...9 International Restrictions...16 LED Indicators ...8 Maintenance of the Adapter...6 Master Discovery/Connection Sequence ...12 Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) Index New Zealand Telecom Warning Notice ... 17 Ordering Replacement Parts... 19 Package Contents ... 5 Parts Supplied by User ... 5 Pin Assignments...
Need help?
Do you have a question about the MultiConnect MTS2BTA and is the answer not in the manual?
Questions and answers