6-20 ELECTRICAL SYSTEM
STARTER MOTOR REMOVAL AND DISASSEMBLY
• Remove the generator. (!6-9)
• Disconnect the starter motor lead wire and remove the starter
motor by removing the mounting bolts.
• Disassemble the starter motor, as shown in the illustration.
/ 11 N . m
/ 6 N . m
(0.6 kgf-m)
STARTER MOTOR INSPECTION
CARBON BRUSHES
Inspect the carbon brushes for abnormal wear, cracks or smooth-
ness in the brush holder.
If either carbon brush is defective, replace the brush assembly.
(1.1 kgf-m)
1 O-ring
2 Housing end (inside)
3 Washer
4 O-ring
5 Starter motor case
6 Armature
7 Washer
8 Brush holder
9 Brush spring
0 Housing end (outside)