Suzuki GSX1200 1999 Service Manual page 57

3-22 ENGINE
• Unhook the gearshift cam stopper spring from the lower crank-
case.
• Remove the circlip 1 from the gearshift cam, then draw out
the gearshift cam from the other side.
! !
! ! 09900-06107: Snap ring pliers !
NOTE:
When replacing the gearshift cam stopper bolt 2 , apply a small
quantity of THREAD LOCK "1342" to the bolt.
$ 99000-32050: THREAD LOCK ''1342'' $ $ $ $
" " " " " Gearshift cam stopper bolt: 10 N . m (1.0 kgf-m)
• Remove the gearshift cam stopper 3 by removing the circlip 4.
! ! 09900-06107: Snap ring pliers ! ! !
NOTE:
Rotate the bearing 5 in the crankcase by hand to inspect for ab-
normal noise and smooth rotation.
Replace the bearing if there is anything unusual.
• Remove the oil pump assembly by removing the mounting
bolts.
! ! ! ! 09900-00410: Hexagon wrench set !
• Remove the O-rings and dowel pins.