STARTER MOTOR REMOVAL AND
DISASSEMBLY
• Remove the starter motor. (!3-16)
• Disassemble the starter motor, as shown.
( 5 N . m
0.5 kgf . m
(
3.5 lb-ft
( 6 N . m
0.6 kgf . m
(
)
4.5lb-ft
STARTER MOTOR INSPECTION
CARBON BRUSHES
Inspect the carbon brushes for abnormal wear, cracks or smooth-
ness in the brush holder.
If either carbon brush is defective, replace the brush assembly.
)
ELECTRICAL SYSTEM
1 O-ring
2 Housing end (inside)
3 Washer
4 O-ring
5 Starter motor case
6 Armature
7 Washer
8 Brush holder
9 Brush spring
0 Housing end (outside)
6-21