5-48 CHASSIS
BRAKE PAD REPLACEMENT
• Remove the brake pad cover.
• Remove the clip 1.
• Remove the brake pads along with the shims by removing the
brake pad mounting pins 2 and springs 3.
"
* Do not operate the brake pedal during or after brake
pad removal.
* Replace the brake pads as a set, otherwise braking per-
formance will be adversely affected.
• Install the new brake pads and shims.
"
Be sure to properly install the shims (4,5) as shown in
the illustration.
NOTE:
After replacing the brake pads, pump the brake pedal a few times
to operate the brake correctly and then check the brake fluid level.
BRAKE FLUID REPLACEMENT
• Remove the seat. (&5-2)
• Remove the document tray 1.
• Remove the reservoir tank cap
• Replace the brake fluid. (&5-39)
(
(
(
(
(
Specifications and classification: DOT 4
"
Bleed air from the brake system. (&
&
&
& 2-16)
&