• Remove the exhaust pipe/muffler assembly.
The gasket retainers 1 are installed in the #1 and #4 exhaust
pipes.
NOTE:
When installing a new exhaust pipe/muffler connector, clean any
old dried sealer from the exhaust pipe and from inside the muffler
and the exhaust gas sealer should be applied to both the inside
and outside of the exhaust pipe/muffler connector.
EXHAUST GAS SEALER: PERMATEX 1372
#
#
#
#
# Exhaust muffler mounting bolt: 29 N . m (2.9 kgf-m)
• Remove the exhaust pipe gaskets 2.
"
Be sure to face the tabs A A A A A on the exhaust pipe gasket 2 2 2 2 2
to the inside when installing it.
• Suppport the engine with a proper engine jack.
• Remove the frame down tube mounting bolts and nuts.
• Remove the frame down tube 3.
• Remove the engine mounting bolts, nuts, spacer and brackets.
• Gradually lower the engine.
ENGINE 3-7