Vcc - Led; Net St - Led; Dev St - Led; Opt - Led - KEB COMBIVERT F6 Instructions For Use Manual

3.13.2 VCC - LED

3.13.3 NET ST - LED

3.13.4 DEV ST - LED

3.13.5 OPT - LED

ma_dr_f6-cu-p-inst-20182705_en
LEDs Status
VCC off
NET ST
DEV ST
OPT
VCC Initialization
NET ST
DEV ST
OPT
VCC
ready for operation Device is ready for operation and the LEDs start
NET ST
DEV ST
OPT
Table 3: LEDs at power on
VCC LED col- Description
our
off - Power supply of the control card switched off.
on green Control is supplied with 24 V.
Table 4: Function VCC LED
NET ST LED col- Description
our
off - Device off or booting.
Blink various depending on fieldbus => fieldbus interfaces.
code
Table 5: Function NET ST - LED
DEV ST LED colour Description
off - Device off or booting.
on red Error
on yellow No error, DC link not loaded.
on green no error, ready for operation.
flashing green No error, is used for identification of the unit (fb32).
Table 6: Function DEV ST - LED
OPT LED col- Description
our
- - reserved for options.
Table 7: Function OPT - LED
Product description | 3
Note
Device off
Control is supplied with 24 V
with their normal function (approx. 3 s)
15