Hot-Swap Storage Drive Replacement - Inspur NF5280M6 User Manual

Figure 4-21 Removing the PCIe Card
To install the PCIe card:
1. Take the new PCIe card from the antistatic bag.
2. Align and insert the PCIe card to the Riser card slot.
3. Close the cover plate.
4. Connect the cables of the Riser card. Be sure to connect the cables properly.
5. Align and insert the Riser card to the slot on the motherboard.
6. Press and rotate the latch 180° clockwise to secure the PCIe Riser cage in place.
7. Connect the power cables and clock cables (if available).
8. Install the access panel.

4.4.9 Hot-Swap Storage Drive Replacement

For proper cooling, do not operate the server without the access panel, air ducts,
expansion slot blanks, or other blanks installed. If the server supports hot-swap
components, minimize the amount of time the access panel is open.
To remove the drive:
1. Press the release button to release the lever.
42