Table of Contents
Advertisement
DIMM installation method:
Step 1: Open the lock tabs on both ends of the DIMM slot.
Step 2: Align the bottom key with the receptive point on the slot, press both ends of the
DIMM with your thumbs. Insert the DIMM into the slot completely, and the lock tabs will
automatically secure the DIMM, locking it into place.
6.4 Hot-plug HDDOption
CAUTION:For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.Check the status of the hard disk drive from the hot-plug HDD LED.
2.
Back up all data on the hard disk drive.
3.
Remove the hard disk drive.
Step 1: Remove the access panel as shown by ① and ②, hold the HDD tray handle and
remove the HDD tray as shown by ③.
Hardware Options Installation
27
Advertisement
Table of Contents
