Super-Capacitor Replacement - Inspur NF5280M6 User Manual

2. Press down the hood latch until it locks into place. Make sure the access panel
snaps into place.
3. Tighten the screw on the hood latch clockwise to the locked position with a
Phillips screwdriver.

4.4.2 Super-Capacitor Replacement

To remove the super-capacitor:
1. Remove the access panel (Refer to
2. Disconnect the cable of the super-capacitor.
3. Undo the velcro of the super-capacitor.
4. Remove and put the super-capacitor into an antistatic bag.
Figure 4-3 Removing the Super-Capacitor
To install the super-capacitor:
1. Take the new super-capacitor out from the antistatic bag and position it in
place.
2. Secure the super-capacitor with velcro.
Figure 4-4 Installing the Super-Capacitor
Access Panel Replacement).
28