Operational Requirement - Inspur NF5280M6 User Manual

Configuration
consumption)
12 × 3.5-inch
NVMe drives
24 × 2.5-inch
All
pass-through
configurations
drives
(When GPUs
are equipped,
there are
restrictions on
drive numbers
and CPU
24 × 2.5-inch
power
NVMe drives
consumption)

8.8 Operational Requirement

This section specifies the requirements of temperature, humidity, organisms,
chemical materials and mechanically active materials in the server room when the
server is operating.
1. Temperature and humidity
The temperature, dew point and relative humidity in the server room should meet
Max. Max.
Operating Operating
Temperat Temperature
ure at 30°C at 35°C
with GPUs
Passive-cooli

ng DIMMs
(including
BPS) higher
than 8 W not
supported
8 or less

drives and
CPUs with
TDP at 205 W
or lower
supported
when
equipped
with GPUs
DIMMs

(including
BPS) higher
than 8 W not
supported
Max.
Operating
Temperature
at 40°C
TDP higher
than 165 W
not
supported
DIMMs

(including
BPS) higher
than 6 W not
supported
Passive-cooli

ng GPUs not
supported
CPUs with

TDP higher
than 205 W
not
supported
DIMMs

(including
BPS) higher
than 8 W
not
supported
69
Max.
Operating
Temperature
at 45°C
Passive-cooli

ng GPUs not
supported
Rear drives

not
supported
CPUs with

TDP higher
than 165 W
not
supported
DIMMs

(including
BPS) higher
than 6 W not
supported