Inspur NF5280M6 User Manual page 4

Abstract
This manual describes NF5280M6 server's specifications, features, hardware setup,
warranty information and troubleshooting, which will help users to understand how
best to utilize the server and all its functionalities.
Target Audience
This manual is intended for:
•
Technical support engineers
•
Product maintenance engineers
It is recommended that server installation, configuration, and maintenance is
performed by experienced technicians only.
Safety Precautions
•
If your purchases do not include Inspur on-site installation service, make sure that
you inspect the shipping cartons before unpacking the equipment. If a shipping
carton appears severely damaged, water immersed, or the seal or
pressure-sensitive adhesive tape (PSA) is broken, report this based on your
purchase channel. If you purchased from a third-party supplier, contact your
supplier directly; if you purchased through Inspur direct sales stores, call Inspur
service hotline 1-844-860-0011/1-760-769-1847 for technical support.
•
For your safety, please do not disassemble the server's components, extend
configuration or connect other peripherals arbitrarily. You can contact Inspur for
our support and guidance.
•
Before disassembling the server's components, please be sure to disconnect all the
cables connected to the server.
•
Please install the product-compatible operating system and use the driver that
comes with the server or provided by Inspur. You can go to our official site, on the
Top Navigator, click on Support > Product Support > Drivers, then find the correct
driver of your product based on the prompt. An incompatible operating system or
a non-Inspur driver may cause compatibility issues and affect the normal use of
the product. Inspur will not assume any responsibility or liability for this.
•
BIOS and BMC setup is a significant factor in correctly configuring your server. If
Foreword
iii