Hot-Swap Drive Components - Inspur NF5260FM6 User Manual

Figure 5-5 Installing a DIMM

Hot-swap Drive Components

For proper cooling, do not run the server without the server top cover, air
directors, expansion slot covers, or blanks installed. If the server supports hot-
swap of components, avoid frequently opening the top cover of the server.
1. Determine the drive operating status by hot-swap drive tray LEDs.
2. Back up all server data on the drive.
3. Remove a hot-swap drive.
a. Press the drive panel button.
Figure 5-6 Pressing the button
b. Automatically eject the wrench on the drive tray and remove the drive tray
horizontally outward.
30