Table of Contents
Advertisement
automatically secure the DIMM, locking it into place.
6.3 Hot-plug HDD Option
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.
Determine the status of the hard disk drive from the hot-plug HDD LED.
2.
Back up all server data on the hard disk drive.
3.
Remove the hard disk drive.
Step 1: Press the HDD panel button, the lever on HDD tray pops up automatically.
18
Advertisement
Table of Contents
