Figure 4-11 Inserting the Plug
4.
Install the air duct.
5.
Connect the cable of the super-capacitor.
6.
Install the access panel.
4.4.6 DIMM Replacement
•
Mixing use of RDIMMs and LRDIMMs is not allowed.
•
Mixing use of BPS is not allowed.
•
Mixing use of BPS with RDIMMs or LRDIMMs is allowed.
To remove the DIMM:
1.
Remove the access panel (Refer to
2.
Disconnect the cable of the super-capacitor.
3.
Remove the air duct (Refer to
4.
Locate the DIMM you want to replace.
5.
Push the release tabs on both ends of the DIMM slot outward to unlock it.
6.
Gently lift and remove the DIMM from the slot.
Access Panel
Replacement).
Air Duct
Replacement).
32