Rear M.2 Drive Replacement - Inspur NF5280M6 User Manual

Figure 4-29 Pulling Out the OCP Card
3. Put the OCP card into an antistatic bag.
To install the OCP card:
1. Take the new OCP card out from the antistatic bag.
2. Insert the OCP card into the card slot until it snaps into place.
3. Tighten the thumbscrew securing the OCP card to the server clockwise.

4.4.12 Rear M.2 Drive Replacement

M.2 drives are not hot-swappable. Power down the server and remove all power
cables before removing or installing M.2 drive.
To remove the rear M.2 drive:
1.
Press the release button to release the lever.
Figure 4-30 Pressing Release Button
47