Table of Contents
Advertisement
Figure 4-27 Removing the PSU
2.
Pull the PSU out of the power bay and put it into an antistatic bag.
To install the PSU:
1.
Take the new PSU out from the antistatic bag.
2.
Make sure the blue release tab is on the right of the PSU. Grasp the handle and
push the PSU into the power bay until it snaps into place.
4.4.11 OCP Card Replacement
To prevent damage to the server or expansion cards, power down the server and
remove all power cables before removing or installing the OCP card.
To remove the OCP card:
1.
Loosen the thumbscrew securing the OCP card to the server anticlockwise.
Figure 4-28 Loosening the Thumbscrew
2.
Pull out the OCP card from the server.
46
Hide quick links:
Advertisement
Table of Contents
