Getting Started; Installing Server Into The Rack; Power On/Off; Pre-Disassembly Instructions - Inspur NF5280M6 User Manual

Hide thumbs Also See for NF5280M6:

Table of Contents

4 Getting Started

For detailed information on installing the server into the rack with rails supplied by

Rack-Mounted Server Installation Guide

Inspur, see

If you would like to use non-Inspur rails, please contact Inspur Customer Service

first to ensure the server can be installed to the rack safely and properly. The

loading-bearing capacity of non-Inspur rails must be higher than 100 kg. If not,

you MUST use Inspur-supplied rails as using these non-Inspur rails may cause

such risks as installation failure. Inspur will not assume any responsibility or

liability for any damage or injury caused by this.

To reduce the risk of personal injury or damage to the equipment, DO secure the

mounting ears to the posts firmly to prevent server from moving or sliding out

from the cabinet.

To power on and off the server, press the power button.

To completely shut down the server, press the power button and disconnect the

power cable from the server.

To reduce the risk of personal injury, electric shock, or damage to the equipment,

remove the power cord to disconnect power from the server. The Power button

does not shut off the system power completely. Portions of the power supply and

some internal circuitry remain active until the AC power is removed.

Read the installation instructions for all the hardware operations before

disassembling or re-assembling the components. All prerequisites must be

completed prior to starting installation or maintenance.

Table of Contents

Show Quick Links

Table of Contents