Table of Contents
Advertisement
3.
With the gold pins up, align the triangle mark on the CPU with that on the Clip.
Grasp CPU by its two edges, and install it into the Clip. Make sure the notches of
the CPU are aligned with the tabs of the Clip and the CPU is secured in place by
the tabs on the four sides of the Clip.
Figure 4-19 Installing the CPU
4.
Remove the protective cover if present.
5.
With the gold pins down, align the triangle mark on the CPU with that on the
heatsink to attach the PHM onto the CPU socket.
6.
Press the four lock-in wires outward with both hands simultaneously.
7.
Tighten the four screws securing the PHM to the CPU socket clockwise in the
sequence as shown on the heatsink label with a T30 Torx screwdriver.
8.
Install the air duct.
9.
Connect the cable of the super-capacitor.
10.
Install the access panel.
4.4.8 PCIe Card Replacement
•
To prevent damage to the server or expansion cards, power down the server
and remove all power cables before removing or installing the PCIe card.
•
To prevent damage to the PCIe slot pins, be sure to apply even force and
40
Hide quick links:
Advertisement
Table of Contents
