Precautions - Inspur NF5280M6 User Manual

•
Using an incompatible battery may cause explosion. When battery
replacement is required, please consult the manufacturer first, and choose
batteries of the same or equivalent type suggested by them. Do not
disassemble, crush, puncture the batteries or short circuit the external
connection point, and do not expose them in the environment over 60°C. Never
throw batteries into fire or water. Please do not attempt to open or repair the
batteries. Dispose of used batteries properly. Do not put waste batteries, circuit
boards or other components that may contain batteries with other wastes. For
battery recycling, please contact the local waste recycling center.
•
For independent cabinets, please install front and side stabilizers before
installing the equipment into the cabinet. For cabinets connected with other
cabinets, please install front stabilizers first. Failure to install the
corresponding stabilizers before installing the equipment into the cabinet may
cause the cabinet to tip over, possibly leading to personal injury. Hence, please
do make sure to install stabilizers before installing the equipment into the
cabinet. After installing the equipment and other components into the cabinet,
only one component can be pulled out from the cabinet through its sliding part
at one time. Pulling out several components at the same time may cause the
cabinet to turn over, resulting in serious personal injury.
•
Please do not move the cabinet on your own. Considering the height and
weight of the cabinet, the moving of the cabinet should be completed by at
least two people. Moving it without adequate, trained personnel could result in
severe injury or death.
•
It is prohibited to directly short-circuit the copper busbar. Please do not touch
the copper busbar when the cabinet is powered on.
•
This is a Class A product, and may cause radio interference. In such case, users
may need to take necessary measures to mitigate the interference.

1.2 Precautions

The following considerations may help avoid problems that could damage the
components or cause data loss, etc.
•
In the event of the following, please unplug the power plug from the outlet and
contact Inspur Customer Service:
The power cords or power plugs are damaged.
–
The products get wet.
–
The products have fallen or have been damaged.
–
Other objects have fallen into the products.
–
2