Table of Contents
Advertisement
Spatial Manager software can give you a good idea of how bad the vibrations are. If the vibrations
are causing the sensors to go over range you will need to increase the sensors range, see section
7.7.
If Spatial is unable to tolerate the vibrations there are several options:
1. Try to find a mounting point with less vibration.
2. Spatial can be mounted with 3M foam rubber double sided tape or a small flat piece of
rubber.
3. Spatial can be mounted to a plate which is then mounted to the platform through vibration
isolation mounts.
Spatial OEM Reference Manual
Page 33 of 88
Version 2.7
Advertisement
Table of Contents
Need help?
Do you have a question about the Spatial OEM and is the answer not in the manual?