Shift Cable Installation - Mercury optimax 115 Installation Manual

75/90/115 OPTIMAX

Shift Cable Installation

Install cables into the remote control following the instructions provided with the remote con-
trol.
NOTE: Install the shift cable to the engine first. The shift cable is the first cable to move when
the remote control handle is moved out of neutral.
1. Position remote control into neutral.
2. Shift outboard into neutral.
3. Measure the distance (a) between pin and center of barrel pocket.
Page 12 of 18
c
a - Distance Between Pin And Center of Barrel Pocket
b - Pin
c - Barrel Pocket
N
a
F
N R
b