[9-4 Maintenance LED Display and Troubleshooting ]
2. Collecting operation data (Outdoor unit)
No.
Switch
6
Collection in progress
7
Collection suspended
SW6-10:
OFF
SW4:
No.28
8
Flash memory error
9
Collect data from both OC and OS from multiple-outdoor unit systems.
System operation data are stored on OC, and compressor operation time of OS and switch settings are stored on OS.
When importing the OS data to the Maintenance Tool, an import error may appear. This error indicates that no data are avail-
able for import and does not indicate equipment failure.
BS_09_F
Meaning
Maintenance LED Display
Error
Description
"ON" OC is collecting operation da-
ta. A blinking display indicates that
data collection is temporarily sus-
pended. No switch setting is neces-
sary. Data collection will be
resumed automatically. See Sec-
tion [9-4-2 Troubleshooting]2-(1).
"OFF" Collection of operation data
is suspended.
"F-Er" Collection of operation data
is suspended due to failure in the
flash memory used to store opera-
tion data. It may be necessary to
change the board. See Section [9-
4-2 Troubleshooting]2-(2).
"Err" Error was found due to the fail-
ure in units. After addressing the
cause, data collection needs to be
restated. See Section [9-4-2 Trou-
bleshooting]2- (3).
chapter 9 -
11