[8-15 Main-HBC Maintenance Instructions ]
5. Pump assembly steps
(1) Before assembly
Clean and check all parts.
Replace all damaged parts.
Please keep the motor and parts completely dry during installation to prevent the contami-
nated media from entering the motor shell or rotor.
(2) Assembly tool
Name
Plastic hammer
Hexagonal torque wrench
(Range: 3-5 N·m)
Wrench
Inner hexagonal sleeve
Fixed piece
Included in the service kit
Horizontal ruler
BS_08_L
Specifications
-
S3
S14
S13
-
-
Photo
151
chapter 8 -