Mitsubishi Electric PURY-M200YNW-A1 Service Handbook page 362

[8-13 Parts Replacement Instructions (Outdoor Unit) ]
(3) Remove the braze from the pipe where circled in the figure. (See Figure 4.)
(4) Remove the braze from the pipe where circled in the figure. (See Figure 5.)
(5) Remove the check valve assembly (CV2a/b) from the area indicated in Figure 6.
(6) Braze the replacement parts at four areas. (See Figure 7.)
Figure 7
This step completes the check valve replacement procedure. Re-place the components that were removed as they were.
BS_08_L
Figure 4
Figure 5
Remove the
assembly
through this
space.
Figure 6
Replace the check valve with the one
included with the replacement kit.
95
chapter 8 -