Mitsubishi Electric PURY-M200YNW-A1 Service Handbook page 384

[8-13 Parts Replacement Instructions (Outdoor Unit) ]
(22) After removing the heat exchangers, dispose of the front and the rear heat exchanger supports. (See Figures 21 and 22.)
The front and the rear heat exchanger supports do not need to be installed. (The front and the rear heat exchanger
supports are for suppressing vibration during transportation.)
Figure 21
Front heat exchanger support
(23) Re-place the front and the rear heat exchangers in the reverse order as they were removed.
Re-place the components that were removed as they were.
BS_08_L
Front heat exchanger
Rear heat exchanger support
Unscrew the screws.
Center pillar
Figure 22
Unscrew the screws.
117
chapter 8 -