Table of Contents
Advertisement
C
5
HAPTER
FIGURE 3. RS1 Unit Installed on Cab Roof
3. Insert the tab of the RS1 latch mounting bracket into the slotted tab of the receiver mounting bracket to
interlock the brackets.
4. Secure the RS1 mounting bracket to the latch mounting bracket by securing the latch.
NOTE:
It may be necessary to adjust the latch in order to secure the RS1 unit.
INSTALL THE HYDRAULIC DRIVE UNIT (HDU)
INSTALL THE HDU TO BULKHEAD HARNESS
FIGURE 4. Access Panel to be Removed
1. Locate and remove the wall panel behind the operator's seat.
26
Case IH Patriot 3XX0, Model Year 2010-2016 RS1™ HDU Guidance and Steering Installation Manual
Advertisement
Table of Contents
