Table of Contents
Advertisement
C
4
HAPTER
INSTALL THE HYDRAULIC DRIVE UNIT (HDU) AND SC1
INSTALL THE SC1/HDU HARNESS
FIGURE 3. Access Panel to be Removed
1. Locate and remove the wall panel behind the operator seat.
FIGURE 4. Existing Machine XB-7 Bulkhead Connection
2. Locate the machine's existing XB-7 bulkhead connection in the bottom, right of the cab.
3. From outside the cab, remove the nut and disconnect the machine's 31-pin plug from the XB-7 bulkhead
connector.
4. From inside the cab, remove the XB-7 bulkhead connector from the hole in the cab wall.
12
Raven SC1™ HDU Installation Manual for Case IH Patriot 2250 (Steer Ready, MY 2017-2019)
Advertisement
Table of Contents
