Download Print this page

Cable Routing; Start-Up Procedures - Raven SmarTrax Spra-Coupe 220 Installation Manual

Advertisement

CABLE ROUTING

Connect wire harness to left and right steering coils, SPS and pressure switch.
Inner coil is right coil and outer coil is left coil. If steering is reversed, switch coil connections
around.

START-UP PROCEDURES

Check S.P.S. stroke length to be sure it is not over compressed or over extended.
Turn steering wheel full left and right to purge system of air.
Set valve timing for a left to right and right to left time of 12 to 13 seconds.
Adjust pressure switch to most responsive setting. For additional information, refer to
Universal kit manual.
5

Advertisement

loading