Advertisement
After installing the SmarTrax on your machine, always follow these start-up
procedures.
w
Make sure the Steering Position Sensor rotates freely when turning the
wheels.
w
Turn the wheels fully from side to side numerous times to remove air
from the hydraulic system.
w
Time the wheels for full left to right and right to left time of approximately
8 - 10 seconds. Refer to the Universal Kit Manual for instructions on
this.
w
Adjust the pressure switch to the most responsive setting. Refer to the
Universal Kit Manual for instructions on this.
Manual # 016-0190-068
C
S
U
P
TART-
P
ROCEDURES
H A P T E R
13
Advertisement
