Routine Operation - Raven RS1 Guidance And Steering Installation Manual

C 5
HAPTER
FIGURE 20. RS1 Tee Cable Connected to Machine's Bulkhead
6. Connect the remaining 35-pin connector of the RS1 tee cable to the open port of the machine's bulkhead.

ROUTINE OPERATION

FIGURE 21. Resume Switch Locations
Locate and identify the resume switch on the joystick as it is required for RS1 system operation.
Refer to the Raven RS1 Guidance and Steering Calibration & Operation Manual (P/N 016-4010-001) for instructions
on Calibrating the RS1 system, adjusting system settings, and system operation.
30
Resume Switch
Case IH Trident 5550 - Non-Steer Ready, Raven RS1™ HDU Guidance and Steering Installation Manual