Advertisement
Chapter 1: Getting Started
❑ Setup
❑ Hardware Operation
❑ Software Modes
❑ Arm as Mouse
❑ Screen Layout (General)
❑ Screen Layout (Gage Mode)
❑ Screen Layout (Metrology Mode)
❑ Calibration
❑ What is Calibration?
❑ Probe Calibration
❑ Practical - Calibration
Chapter 2: Basic Measurements (Gage Mode)
❑ Tools
❑ Measuring
❑ Printing
❑ Repeat the Part
❑ Practical - Using Tools
❑ Angle - Edge to Edge
❑ Distance - Hole to Hole (Center)
❑ Geometry - Hole Diameter
❑ GD&T - Flatness
❑ Repeat and Print
❑ 3D Caliper
❑ Practical - Using 3D Caliper
❑ 3D Caliper Temporary Zero
Chapter 3: Feature Measurements (Metrology Mode)
❑ Features
❑ Types of Features
❑ 2D Features
❑ 3D Features
❑ Practical - Measuring Features
❑ Face
❑ Edge (2D)
❑ Hole
❑ Cone
❑ Review Results
❑ Repeat and Print (Optional)
Course Checklist
i
Basic Training Workbook
Version 1.5 - August 2007
Advertisement
