Basic Training Workbook
Version 1.5 - August 2007
Use the Tabular command to create a report of the features and dimensions on your part.
1 Select the REPORTS drawer in
the Toolbox.
2 Select the NEW REPORT
group.
3 Select the Tabular command.
4 Select the RUN button.
5 Type your name, the part name, and the serial number, or use the defaults.
N
: Select the ADVANCED check box to choose from existing part names or serial
OTE
numbers.
6 Select OK to generate the report preview.
•
•
•
Chapter 4: Basic Part Measurements (Metrology Mode)
Select OK to exit the command.
Select PRINT to send the report to any printer connected to your computer.
Select SAVE to create a report file on your computer. You may view and print this
file later using the View Report command.
60