Advertisement
5 Follow the on-screen instructions and press the GREEN button to digitize the points for
the probe calibration.
N
: All of the points in this method will be collected by holding down the GREEN button.
OTE
The FARO Gage will collect points as fast as possible (scanning) until you release the
GREEN button.
6 Place the ball probe in the hole. Start in a vertical position.
7 Press and hold the GREEN button. Sweep the handle down to to one of the horizontal
positions. Be sure that the ball probe remains seated in the hole.
8 Release the GREEN button and repeat for each position.
9 Digitize points in the hole and sweep to
position #1.
10 Digitize points in the hole and sweep to
position #2.
11
Basic Training Workbook
Version 1.5 - August 2007
Chapter 1: Getting Started
Advertisement
