Advertisement
Chapter 1: Getting Started
•
Objective: Learn the basic FARO Gage system setup procedure,
familiarize yourself with the screen layout, and calibrate the probe.
Setup
The FARO Gage must be mounted in an upright position. Do not mount the FARO Gage in an
inverted (upside-down) or sideways position.
To fasten the FARO Gage:
1 Attach the 3.5" threaded ring and surface mount plate to any stable location. Tighten all
mounting bolts to 100-inch pounds.
2 Place the FARO Gage on top of the 3.5" threaded ring.
3 Screw the threaded collar clamp onto the base of the FARO Gage and the 3.5" threaded
ring.
4 Use the wrench to tighten the threaded collar clamp.
1
Basic Training Workbook
Version 1.5 - August 2007
Chapter 1: Getting Started
Advertisement
